南京睿督公司专业从防火烟毒测试十多年，专业提供美标ASTM E1317,ISO 5658-2,IMO Resolution A.653(16),IMO 2010 FTP Code等材料防火性能测试，ASTM E1317-19 表面终饰材易燃性测试方法，咨询电话：025-8658 3475。

ASTM E1317-19测试标准
ASTM E1317-19 Standard Test Method for Flammability of Surface Finishes
ASTM E1317-19 表面终饰材易燃性测试方法。

ASTM E1317 this test method was originally developed to closely follow the test procedure of IMO Resolution A.653(16).ISO 5658-2 also describes similar test equipment. The test procedure used by IMO for regulation of surface finishes is IMO 2010 FTP Code Part 5, which has replaced IMO Resolution A.653(16).

ASTM E1317表面燃烧性能测试参考标准
ASTM E84 Test Method for Surface Burning Characteristics of Building Materials
ASTM E162 Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E176 Terminology of Fire Standards
ASTM E286 Method of Test for Surface Flammability of Building Materials Using an 8-ft (2.44-m) Tunnel Furnace
ASTM E648 Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM E970 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
ASTM E1321 Test Method for Determining Material Ignition and Flame Spread Properties

ASTM E1317防火性能测试方法
横向火焰蔓延测试是样品垂直放置在一个矩形辐射面板上并且额外的气体火焰燃烧器。根据CFE值进行评估，CFE值（临界热辐射量值，用kW/m2表示）。CFE值是样品表面火焰停止传播并熄灭的位置所对应的辐射热量值，CFE值是通过测试最大火焰蔓延（mm）,与此相应的辐射热值的曲线。这个测试在一个不燃的校正板上进行。

相关标准参考阅读
EN ISO 5660-1热释放量测试 http://www.fire-test.com/teststandard/eu/3357.html
EN ISO 5658-2垂直火焰蔓延测试 http://www.fire-test.com/teststandard/eu/3356.html
IMO第5部分表面可燃性测试 http://www.fire-test.com/teststandard/imo/3398.html
IMO Res.A.653(16) & IMO Res.A.687(17) http://www.fire-test.com/teststandard/imo/3398.html

更多关于ASTM E1317材料表面火焰蔓延测试，请咨询南京睿督公司
南京睿督公司咨询电话：025-8658 3475   400-603-6575
网址：www.fire-test.com  
邮箱：info@fire-test.com
……