电话:025-8658 3475
传真:025-8658 3457
网址:http://www.nff16-101.com/
邮箱:info@fire-test.com
AS/NZS 4859.1:2018 - Thermal Insulation material testing
玻璃棉岩棉等保温材料出口澳大利亚需满足AS/NZS 4859.1的标准要求,产品经过测试合格并经过严格的工厂评估后可颁发认证证书STANDARDMARK认证,南京睿督公司已澳洲NATA资质实验室合作十年多年,专业提供NATA资质的AS/NZS 4859.1(AS 4859.1),AS1530.3,AS3837等澳标防火检测,咨询电话:025-8658 3475。
AS/NZS 4859.1:2018 - Thermal Insulation material testing
Testing in accordance with AS/NZS 4859.1:2018 Thermal Insulation Materials for Buildings - General Criteria and Technical Provisions.
ASNZS 4859.1 was significantly amended in 2018. The emphasis on the amendment was to include a wider range of insulating materials bringing rigid foam products into the standard. These new inclusions now incorporate the following:
EPS – expanded polystyrene foams
XPS – extruded polystyrene foams
PUR – polyurethane foams
PIR – polyisocyanurate foams
PF – phenolic foams
With the exception of EPS, these foams are expanded with a blowing agent. Due to the presence of the blowing agents, the cell gas composition changes with time and exposure to heat. These changes draw interest to the effect on insular performance. Therefore, the new standard gives us procedures for accelerated ageing to predict the effect of ageing over a 25 year period. The accelerated ageing procedures differ somewhat depending upon the type and thickness of foams as listed above and testing now aims to achieve declared values for thermal resistance and thermal conductivity corresponding to an expected service life. As thermal performance is a primary performance requirement, attention has been given to the determination and labelling of thermal performance. AWTA Product Testing has drawn from the standard and it’s relevant conditioning and ageing procedures and tabled fact sheets to assist our clients to determine the ageing and testing that needs to be done in order to measure declared thermal performance. Our customer support team is ready to assist you to determine ageing and testing requirements in order to correctly label rigid foams for the market place.
AS/NZS 4859.1玻璃棉岩棉等保温材料澳大利亚认证 http://www.firete.com/popular_standards/14076.html
玻璃棉岩棉等保温材料出口澳大利亚需满足AS/NZS 4859.1的标准要求,产品经过测试合格并经过严格的工厂评估后可颁发认证证书STANDARDMARK认证,南京睿督公司已澳洲NATA资质实验室合作十年多年,专业提供NATA资质的AS/NZS 4859.1(AS 4859.1),AS1530.3,AS3837等澳标防火检测,咨询电话:025-8658 3475。
AS/NZS 4859.1:2002保温材料澳大利亚认证
AS/NZS 4859.1:2002-Materials for the thermal insulation of buildings - General criteria and technical provisions
AS/NZS 4859.1:2002-建筑物隔热材料,一般标准和技术条款(玻璃棉、岩棉等保温材料)
AS/NZS 4859.1主要关注如下方面的测试项目
热阻、对火的反应、重量、密度、尺寸等方面测试
thermal resistance, density, dimension, reaction to fire
AS/NZS 4859.1玻璃棉岩棉认证标准适用范围Scope
This Standard specifies requirements and methods of test for materials that are added to, or incorporated in, opaque envelopes of buildings and building services, including ductwork and pipework, to provide thermal insulation by moderating the flow of heat through these envelopes and building services.
This Standard does not cover materials for the insulation of windows or other glazing. Although this Standard covers thermal performance of insulation, there may be requirements in the Building Code of Australia, or elsewhere, for the same material to have other properties such as for acoustic isolation or fire properties. Further, in a regulatory situation, a requirement for thermal performance cannot compromise any other required performance.
Specific requirements for individual materials or insulation types are given in Sections 5 to 9 of this Standard and in the following Standards:
(a) Rigid cellular polyurethane (RC/PUR) - AS 1366.1;
(b) Rigid cellular polyisocyanurate (RC/PIR) - AS 1366.2;
(c) Rigid cellular polystyrene Moulded (RC/PS-M) - AS 1366.3;
(d) Rigid cellular polystyrene Extruded (RC/PS-E) - AS 1366.4; and
(e) Urea-formaldehyde foam thermal insulationIn situ set foam - AS 4073.
The scope of this Standard does not cover requirements for fire performance
AS3837测试 http://www.fire-test.com/teststandard/other/3434.html
澳洲NATA资质 http://www.fire-test.com/laboratory/6603.html
更多关于澳洲NATA资质AS/NZS 4859.1玻璃棉岩棉等保温材料澳大利亚认证,请咨询南京睿督公司
南京睿督公司咨询电话:400-603-6575 025-8658 3475
网址:www.fire-test.com www.fire-test.cn
邮箱:info@fire-test.com
...