地址:江苏省南京市建邺区江东中路118号德盈大厦1622
电话:025-8658 3475
传真:025-8658 3457
网址:http://www.nff16-101.com/
邮箱:info@fire-test.com
文章正文
Understanding Pass/Fail Criteria for an ASTM E119 Fire Resistance
作者:admin    发布于:2023-07-18 10:26:52    文字:【】【】【

How do we determine that a wall assembly, partition, roof, or floor that you manufacture will be safe when exposed to fire? We rely on the ASTM E119 testing method.

This comprehensive test allows us to evaluate the duration for which certain building elements can contain a fire, retain their structural integrity, or exhibit both properties during a predetermined test exposure.

What is an ASTM E119 Fire Test?

The ASTM E119 fire test is a standardized test method used to evaluate the fire resistance of building components and assemblies. It is conducted in accordance with the ASTM E119 or UL 263 (Underwriters Laboratories) standard. 

One of many types of fire testing standards, this test measures the ability of a construction material -such as a wall, partition, roof, or floor- to withstand exposure to fire for a specified period of time.

The results of an ASTM E119 fire test provide valuable information for building code officials, architects, engineers, and construction professionals. 

The test helps ensure that building components and assemblies meet the required fire safety standards and provide a level of protection to occupants and property in the event of a fire. It aids in the design and construction of fire-resistant buildings, allowing for effective fire prevention, containment, and evacuation strategies.

How We Conduct an ASTM E119 Fire Test

To conduct this test, we uniformly expose numerous building elements to fire, with temperatures and fire conditions that simulate a real-world fire scenario. The test evaluates two primary performance criteria, including:

· Fire resistance – containment of fire and heat
· Structural integrity – load-carrying ability during test exposure

The duration of the fire exposure varies depending on the fire rating being tested, typically ranging from 45 minutes to several hours.

We monitor the testing material for factors such as flame penetration, temperature rise on the unexposed side, structural stability, and the integrity of fire barriers. We also evaluate the period of resistance before the first critical point of failure is observed.

Understanding the Pass/Fail Criteria

In the ASTM E119 fire test, the evaluation of a building component's fire resistance is determined based on pass/fail criteria. These criteria play a crucial role in assessing the performance of the tested material and ensuring its compliance with fire safety standards. 

The following critical timed events are recorded during the ASTM E119 test. Pass/fail (endurance time of the assembly) is when the first of these events occurs:

· The temperature rises to 250 degrees F above the ambient temperature on the average of all unexposed surface thermocouple locations.
· The temperature rises to 325 degrees F above the ambient temperature on any single    unexposed surface thermocouple location.
· For assemblies where structural steel members are utilized, the maximum temperature on a structural steel member exceeds 1,100 degrees F.
· Any flaming is observed on the unexposed surface of the test specimen.
· Smoke and/or gas emissions are hot enough to ignite cotton waste material applied on the  specimen's unexposed surface.
·  Failure to sustain the applied load during exposure of load-bearing assemblies. In many  cases, the ASTM E119 test requires an additional evaluation of the assembly where it is subjected to a hose stream test to establish a fire-resistance rating.

Components that successfully meet the criteria demonstrate their ability to withstand fire exposure for the specified duration without compromising their integrity or contributing to the fire's spread. 

It's important to note that the specific pass/fail criteria may vary depending on the fire rating being tested and the applicable building codes and regulations.

Importance of Compliance With Pass/Fail Criteria

Building code officials, architects, and engineers rely on the results of an ASTM E119 fire test to verify compliance with fire safety standards and make informed decisions regarding the design and construction of fire-resistant buildings.

Here are some key reasons why compliance with these criteria is crucial.

Life Safety

Compliance ensures that buildings are designed and constructed to effectively contain and control fires, allowing occupants sufficient time for evacuation and reducing the risk of injury or loss of life.

Property Protection

Fire-resistant construction elements and assemblies play a crucial role in preventing fire from spreading to other areas of the building, limiting the extent of the fire's impact, and protecting valuable assets.

Code and Regulatory Compliance

Failure to comply with the prescribed criteria can result in code violations, potential legal consequences, and difficulties in obtaining occupancy permits.

Insurance and Liability Considerations

Insurance providers often assess the fire resistance measures implemented in a building when determining coverage options and premiums. Non-compliance with the prescribed criteria may result in increased insurance costs or even denial of coverage. 

Additionally, failure to meet fire safety standards can expose building owners, developers, and contractors to potential liability in case of fire-related incidents.

Ensuring Building Safety With ASTM E119

By understanding the pass/fail criteria of an ASTM E119 fire test, you can ensure that your building components and assemblies meet the required standards and contribute to a safer built environment.

For more details about the ASTM E119, including information about what this test standard does not provide, contact our team of experts.

Tel: (+86) 25 86583475    (+86) 25 86583465
Web: www.fire-test.com    www.firete.com
Email: info@fire-test.com
WeChat:  firetesting  or 17714189018

...


版权所有 Copyright(C)2012-2015    南京睿督科技有限公司
地址:江苏省南京市建邺区江东中路118号德盈大厦1622 苏公网安备 32010502010098号  
电话:025-8658 3475   传真:025-8658 3457  网址:http://www.nff16-101.com/   邮箱:info@fire-test.com   备案号:苏ICP备10201999号