地址:江苏省南京市建邺区江东中路118号德盈大厦1622
电话:025-8658 3475
传真:025-8658 3457
网址:http://www.nff16-101.com/
邮箱:info@fire-test.com
文章正文
CE认证的六个步骤,确保您的产品在欧盟使用安全
作者:admin    发布于:2023-09-11 10:14:19    文字:【】【】【

SIX STEPS TO CE CERTIFICATION
Ensure that your product is safe for use in the EU
CE认证的六个步骤,确保您的产品在欧盟使用安全

When it comes to the European Union's CE certification, CE marking directives and testing processes can be notoriously complex. If you don't have a background in product safety or regulatory compliance, complying with these regulations may seem overwhelming. However, this blog will guide you through the steps involved in getting your Construction Products or Marine Equipment product certified, and thereby being eligible for sale in Europe.

When it comes to the European Union's CE certification, CE marking directives and testing processes can be notoriously complex. If you don't have a background in product safety or regulatory compliance, complying with these regulations may seem overwhelming. However, this blog will guide you through the steps involved in getting your Construction Products or Marine Equipment product certified, and thereby being eligible for sale in Europe.

◆ 1 - CHECK IF CE MARK IS REQUIRED 确认产品是否需要CE认证
The CE mark is required for products that fall under the scope of one of the EU directives. The CE marking is not required for products that are not covered by any of these directives. We are looking at Construction Products here and so we'd be thinking about the Regulation (EU) No 305/2011.
Marine Equipment Directive 2014/90/EU

A product that does not carry a CE mark must be accompanied by documentation stating that it does not need to comply with all relevant EC Directives and laws and that there are no additional requirements for placing on the market in another member state.

If you want to sell your products within the European Economic Area (EEA), you need to ensure that your product complies with applicable national standards in each country as well as EU standards.

◆ 2 - CHECK PRODUCT FOR CONFORMITY WITH DIRECTIVES 确认产品CE认证指令及法规
Once you've determined that your product meets the requirements of your target country's relevant directives, standards, and harmonized standards, you'll need to ensure that it also adheres to any national standards. This may include legal or administrative provisions such as:

Date of manufacture
Place of manufacture
Type of product 
Serial number or batch number

◆ 3 - IDENTIFY IF NOTIFIED BODY IS REQUIRED 欧盟公告号实验室要求
Under the requirements of all Directives, a third-party assessment is mandatory. The distinction is whether or not this assessment must be completed by a Competent Authority or a Notified Body.

A Notified Body is typically required for higher risk products (Construction Products or Marine Equipment product, etc.). A Notified Body will provide a full certification to CE marking requirements. There is no self-declaration available using this compliance path.

◆ 4 - DETERMINE TESTING AND CERTIFICATION REQUIREMENTS 测试及认证的要求
Once you’ve determined which directives your product is subject to, you need to review the testing and certification requirements for each directive. You can find these requirements on the European Commission website.

The types of testing and certification requirements will depend on the product and its intended use. 

◆ 5 - INCORPORATE CE MARK INTO PRODUCT DESIGN, LABELING AND DOCUMENTATION CE标志&CE标签
The CE mark must be visible, readable, and legible. It must be placed in a visible, readable, and legible position on the product or its packaging. The CE marking should not be obscured by other labels or parts of the product it is affixed to.

◆ 6 - PERFORM RISK ASSESSMENT, COMPILE TECHNICAL CONSTRUCTION FILE, AND PREPARE DECLARATION OF CONFORMITY. DoP文件及TCF文件
For most products shipped into the EU the self-declaration process of demonstrating compliance is the most common method, as such, we will expand on that here. Risk assessments are required for most products subject to CE marking. You need to review your product to determine if it poses a risk. Identify the potential hazards associated with its use in “normal” and “abnormal” conditions, as well as how these might combine during an incident or failure mode.

The technical construction file (TCF) contains information about your product and how it complies with EU legislation. It includes drawings, descriptions, material specifications/certifications – all related information that helps ensure each part is safe for consumers by providing insight into how they were produced or manufactured.

The TCF must be submitted to the manufacturer, importer, or distributor of the product. It should be kept for 10 years after being issued. 

CE认证的六个步骤 50%.jpg

√ CONCLUSION
The CE mark is a mandatory marking for products that are sold in the European Union. It indicates that your product complies with all relevant directives and regulations, and you should use it on all applicable products.

In many cases, it's possible to handle the CE mark process yourself (self-declaration using a Competent Authority third party), but the complexity of the CE marking directives and testing processes may make this a daunting task. Partnering early with a Competent Authority or Notified Body is the best approach to ensure that you are choosing the appropriate compliance path for your products. Notified Bodies and Competent Authorities are experts in their field and independent from manufacturers and suppliers, offering third-party, unbiased assessments of your product. SMART with NB1020 & NB1301 is both a Competent Authority and Notified Body in the EU.

SMART has worked with a wide range of companies to help them with the CE marking process. We can help you determine the correct compliance path to choose for CE Marking. Our team will also conduct any necessary testing and provide a report on the results.

√ We can assist you with compliance for the following products and accompanying CE Marking Directives:

Construction Products 
Construction Products Regulation – Regulation (EU) No 305/2011

Marine Equipment
Marine Equipment Directive 2014/90/EU

√ 相关参考
欧盟公告NB机构&TAB机构-TZUS(NB1020)欧盟强制CE认证及ETA认证   https://www.fire-test.com/newsinfo/5947886.html 
欧盟公告NB机构&TAB机构-TSUS(NB1301)欧盟强制CE认证及ETA认证   https://www.fire-test.com/newsinfo/5947954.html 
南京睿督2023年最新解读:欧盟ETA认证与CPR法规及CE认证的关系    http://www.cprce.com/Certification/eta/918.html 

南京睿督公司为欧盟公告号Notified Body实验室授权合作机构,可以直接受理各类建筑产品CE认证及ETA认证
南京睿督全国免费咨询电话:400-603-6575   025-8658 3475
网址:www.hksmartps.com      www.cprce.com   
邮箱:info@hksmartps.com
微信:firetesting  或 17714189018



版权所有 Copyright(C)2012-2015    南京睿督科技有限公司
地址:江苏省南京市建邺区江东中路118号德盈大厦1622 苏公网安备 32010502010098号  
电话:025-8658 3475   传真:025-8658 3457  网址:http://www.nff16-101.com/   邮箱:info@fire-test.com   备案号:苏ICP备10201999号